How Do Car Seats Fit in a 2022 Audi E-Tron?
How Do Car Seats Fit in a 2022 Audi E-Tron?
Degree
- latch: The E-Tron has two sets of lower latch mounts in the outer rear seats. Bottom fixtures are easy to find and use under removable plastic covers. The E-Tron has three upper linkage stabilizers located in the rear seat backs of the rear seat. Anchors are well defined, making it easy for caregivers to locate them.
- infant seat: With the front passenger seat set in our 5-foot-8-inch tester, we had no issues installing the rear-facing infant seat. The spacious back seat easily accommodates this large car seat.
- Rear-facing convertible seat: As with the infant seat, the convertible rear seat was easy to install in the rear seat.
- Front convertible seat: This was another quick and easy install: the forward-facing car seat fits nicely on the E-Tron. Our tester removed the cargo area cover to access the top rope anchor.
- Super seat: The high-back booster seat fits nicely in the E-Tron’s bolstered rear seats. The seat belt buckles are located on fixed bases that allow children to fasten the seat belt themselves.
How Do Car Seats Fit in a 2022 Audi E-Tron?
mark b
- no one
C . degree
- no one
grading scale
a: Plenty of space for a car and baby seat; It does not affect the driver’s or front passenger’s legroom. It is easy to find and connect latch and bolt anchors. There are no headrest or seat fitting issues. Easy access to the third row.
B: Single room, apt or connection issue. Some problems reaching third grade when available.
A: Marginal room plus fitting or communication problem. Difficult to reach third grade when available.
Dr: Insufficient space, as well as various installation or connection problems.
F: Inappropriate or unsafe.
How Do Car Seats Fit in a 2022 Audi E-Tron?
Editors Jennifer Geiger and Jennifer Newman are certified child safety seat installers.
For the car seat inspection, we use the KeyFit 30 infant safety seat, the Contender 65 convertible seat, and the Graco TurboBooster seat. The front seats adjust for a 6-foot-tall driver and a shorter passenger. Three child seats are installed in the second row. The booster seat is behind the driver’s seat, and infant seats and convertible seats are mounted behind the front passenger seat.
We also install the forward-facing convertible in the second-row center seat with the booster seat and child seat in the outer seats to see if; A child in a booster seat must have access to the seat belt buckle. If there is a third row, we install a booster seat and a convertible front seat. Learn more about .
Parents should also remember that they can use the Latch system, and that Latch anchors have a weight limit of 65 pounds, including the weight of the child and the weight of the seat itself.
