How Do Car Seats Fit in a 2022 Chevrolet Silverado? Verdict: The big Chevrolet got a new interior for 2022, and there’s a lot to love about child car seats, specifically the truck’s accessible lower berths and plenty of room to easily accommodate three car seats via the back seat seat.
yes.
Take a look at how the Latch system and each car seat below score on the 2022 Chevrolet Silverado Car Seat Inspection.
How Do Car Seats Fit in a 2022 Chevrolet Silverado?
How Do Car Seats Fit in a 2022 Chevrolet Silverado?
Degree
- latch: Two sets of bottom anchors are shown for easy access and connection; They are painted red for improved visibility. Three top-attaching straps are behind the headrests and are easy to find, but can be confusing to use without an owner’s manual (see the forward-facing convertible entry below).
- infant: Connection was easy, and the 5-foot-6-inch front passenger had plenty of legroom in front of the car seat.
- Convertible Back Facing: As with the infant seat, this car seat was easy to install and a good fit without compromising the comfort of the front passenger.
How Do Car Seats Fit in a 2022 Chevrolet Silverado?
mark b
- forward convertible: After removing the headrest to position the car seat parallel to the seat back, the convertible design worked well in the forward position, and we had no trouble connecting to the lower mounts. The seat got a lower score because connecting to the top rope stabilizer isn’t very intuitive. To install the convertible on the passenger side, the vehicle owner’s manual states that the top strap is routed through the upper harness on the passenger side seat back and then connected to the seat back grommet in the center position.
- Supporter: We removed the headrest again to adjust the location of the booster on the seat back. The Silverado’s flat bottom seat cushion helped position the booster nicely. It can be difficult for children to grasp and use the truck’s elastic buckles independently.
How Do Car Seats Fit in a 2022 Chevrolet Silverado?
C . degree
- no one
grading scale
a: Plenty of space for a car and baby seat; It does not affect the driver’s or front passenger’s legroom. It is easy to find and connect latch and bolt anchors. There are no headrest or seat fitting issues. Easy access to the third row.
B: Single room, apt or connection issue. Some problems reaching third grade when available.
A: Marginal room plus fitting or communication problem. Difficult to reach third grade when available.
Dr: Insufficient space, as well as various installation or connection problems.
F: Inappropriate or unsafe.
About Cars.com Car Seat Inspection
Editors Jennifer Geiger and Jennifer Newman are certified child safety seat installers.
For the car seat inspection, we use the KeyFit 30 infant safety seat, the Contender 65 convertible seat, and the Graco TurboBooster seat. The front seats adjust for a 6-foot-tall driver and a shorter passenger. Three child seats are installed in the second row. The booster seat is behind the driver’s seat, and infant seats and convertible seats are mounted behind the front passenger seat.
We also install the forward-facing convertible in the second-row center seat with the booster seat and infant seat in the outer seats to see if; A child in a booster seat must have access to the seat belt buckle. If there is a third row, we install a booster seat and a convertible front seat. Learn more about.
Parents should also remember that they can use the Latch OR system, and that Latch anchors have a weight limit of 65 pounds, including the weight of the child and the weight of the seat itself.
