How Do Car Seats Fit in a 2022 GMC Sierra?
Verdict: GMC has updated it with a new design, more off-road capability, and an upgraded cabin. We tested the Sierra 1500 Crew Cab in the Denali Ultimate and found that its rear seat easily accommodates three seats thanks to the no-nonsense bottom mounts and generous legroom.
Take a look at how the Latch system and each car seat below score on our car seat inspection for the 2022 GMC Sierra 1500.
How Do Car Seats Fit in a 2022 GMC Sierra?
Degree
- latch: There are two sets of lower latch anchors in the outboard seats; They were subjected to ease of communication. The truck has three tie-down fasteners behind the headrests. To use the tie-down fasteners, you will need to pass the strap through the tie-down loop just behind the car seat and then attach the strap to the lanyard anchor behind the headrest next one for your car seat. It can be confusing, so check your owner’s manual for more information.
- infant seat: The rear facing car seat was easy to install and a good fit. The front passenger had plenty of legroom in front of him.
- Rear-facing convertible seat: This car seat was also easy to install and again, legroom wasn’t an issue.
mark b
- Front convertible seat: Connecting to the lower anchors was easy again, but setting up the upper rope can be a little tricky due to its placement. After removing the headrest, the convertible clutch is well installed in the forward position.
- Supporter: Once the headrest is removed, the raised rear seat fits nicely in the Sierra’s wide rear seats. The two seats in the middle and passenger side have a long and firm buckle, which should be easy for children to grab and use. The driver’s side buckle is flexible and sinks into the cushion, making it hard to find and use. (We install the booster on the driver’s side in our car seat inspections.)
C . degree
- no one
grading scale
a: Plenty of space for a car and baby seat; It does not affect the driver’s or front passenger’s legroom. It is easy to find and connect latch and bolt anchors. There are no headrest or seat fitting issues. Easy access to the third row.
B: Single room, apt or connection issue. Some problems reaching third grade when available.
A: Marginal room plus fitting or communication problem. Difficult to reach third grade when available.
Dr: Insufficient space, as well as various installation or connection problems.
F: Inappropriate or unsafe.
About Cars.com Car Seat Inspection
Editors Jennifer Geiger and Jennifer Newman are certified child safety seat installers.
For the car seat inspection, we use the KeyFit 30 infant safety seat, the Contender 65 convertible seat, and the Graco TurboBooster seat. The front seats adjust for a 6-foot-tall driver and a shorter passenger. Three child seats are installed in the second row. The booster seat is behind the driver’s seat, and infant seats and convertible seats are mounted behind the front passenger seat.
We also install the forward-facing convertible in the second-row center seat with the booster seat and child seat in the outer seats to see if; A child in a booster seat must have access to the seat belt buckle. If there is a third row, we install a booster seat and a convertible front seat. Learn more about .
Parents should also remember that they can use the Latch system, and that Latch anchors have a weight limit of 65 pounds, including the weight of the child and the weight of the seat itself.
